PROFILE OF PRINCIPLE
Name :Dr. Dharmapada Banerjee
Date of Birth :10.2.1945
QUALIFICATION:
-
Ph.D. (Engineering), Indian Institute of Technology, Kharagpur, 1983
(Influence of Deformation –Zone Geometry on Deformation Parameters and pressure
in Rolling with Plain –Barrel Rolls)
- B.Sc. Engineering (Metallurgy), BHU, Varanasi, 1966
EXPERIENCE:
| Employer |
Duration |
Designation |
Nature of Job |
| BCET |
since 7th July, 2005 |
Principal |
Administration |
| MIET, Bhubaneswar |
03.02.2004 - 05.07.2005 |
Principal |
Administration |
| BCET, Balasore |
21.10.2003 –31.01.2004 |
Principal |
Administration |
| Krupajal Engineering College, Bhubaneswar |
01.11.2000-16.08.2003 |
Principal |
Administration |
| College of Engineering, BBSR |
06.12.1999 –30.09.2000 |
Principal |
Administration |
| I.IT. Kharagpur |
06.10.1971 – 31.10.1999 |
Faculty |
Teaching |
(Testing (28 years) And Metal working)
Research and Administration.
| Employer |
Duration |
Designation |
B.H.U. Varanasi
(CSIR) |
13.01.1969 – 30.06.1971 |
Research Scholar Research |
Indian Tube Co.
Jamshedpur . |
05.04.1967 – 10.01.1969 |
Metallurgist Quality Control |
HINDALCO
Renukoot, India. |
25.08.1966 – 31.03.1967 |
Trainee Engineer Production |
Administrative Experience:
Worked in Engineering Colleges as Principal since Dec. 1999.
In IIT, Kharagpur, worked as Warden of Hall of Residence, Member of Departmental Administrative Committee, Member of Dept. Purchase Committee, In-charge of Dept. Training and placement, In-charge of Testing and Metalworking Laboratory and Member of Departmental Computer Committee.
Worked as Metallurgist in –charge of Indian Tube Company for 2 years.
Experience Abroad:
- Went to Moscow Institute of Steel and Alloys, USSR
- (1974-1976) for higher study cum teacher’s training under Indo-USSR Exchange Programme.
- Attended International Symposium on Russian Language (1978), PFU, Moscow
- Visited International Institutes in UK. Germany, Belgium and Holland.
Teaching Engagements:
Courses Taken
a) Plastic Deformation of Metal b) Mechanical Working of Metals.
c) Advanced Theories of Metal Working d) Advanced Metal Working Processes.
e) Advanced Theory of Rolling f) Material Shaping
g) Rolling of Alloy Steels h) Material Shaping Lab.
i) Mechanical Testing of Metals j) Advanced Material Processing lab.
k) Testing and Measurement Lab. l) Theories and calculation in Metal working.
Laboratory Development.Developed Experiments in Metal Working Processes.
- In-Charge, Testing and Measurements laboratory.
Research Activities. Conducted Research Work
a) Rapid Quenching Technique of Metals b)Metal working of Metals.
c) Minimization of Seale loss in Rolling d)Extrusion pressure.
e) Plasticity and Hot Workability of Metals f) Powder Rolling.
g) Deformation parameters and Pressure in Rolling h) Fatigue Life of Metals.
j) Nature of Necking under Tensile Stresses. K) Deep Drawing of Metals.
l) Mathematical Modeling of Temperature Distribution in Rolling.
m) Minimization of scale loss in Rolling.
Design/Fabrication Work
- Design and Construction of a Piston –Anvil Technique for Production of Thin Foil.
- Design and Fabrication of a Hot Workability Testing Machine (Torsion Type)
- Design of Roll-Pass Sequences for Laboratory Type Rolling Mills.
- Design of a laboratory-model Continuous Rolling mill for production of Strips.
Industrial Research/Design Work (Important work)
- Consultancy with R&D Centre of Steel Authority of India on
- Design of a Cooling system to minimize scale loss in wire in wire-rod Mill.
- Development of a Mathematical Model of Temperature in Continuous wire Rod rolling Stands.
- Improvement of the cooling system in Wire Rod Mill of Usa Alloys Ltd. Jamshedpur..
- Improvement in Properties of Continuously Cast Mn Stainless Steel of Jindal, Delhi.
- Conducted Consultancy projects for many leading organization.
Design reports, Technical Papers and Books:
Design Reports (Important works)
- Design of a Continuous Rolling Mill for the Production of 1.5MT Cold-rolled Sheets, Design report. 1972 (with V.S.Berkovskii et al)
- Production of 2MT slabs for Hot and Cold Sheet Rolling. Design Report, 1972 (With V.S. Berkovskii et al)
- Design of a Structural rolling mill) Design Report, 1972 (with V.S. Berkoskii)
- Minimisation of Scale-loss in the Coils of 250mm wire-rod Mill at B.S.P India, Academic Report, 1973(with V.S. Berkovskii et al).
- Determination of Plasticity of Duraluminium on Aging by Wedge Rolling, Academic Report 1973 (with H.R. Sengupta).
- Study of Hot Workability by Torsion, Academic Report, 1974 (with H.R.Sengupta )
- Design of a Strip Mill, Design Report, 1977 (with Prof. P.R. Dhar).
Technical Papers
- An Imporved Piston and Anvil Technique for Quenching Liquid Metals Met Trans 1971(i)2655-57 (with P.Ramachandra Rao and T.R. Anantharaman)
- Influence of Deformation Zone Geometry on Deformation of A Strip in Rolling with Plainbarrel Rolls (in Russian) Scientific Transation on Plastic Deformation of metals and Alloys, Metallurgia, 1979, (118), 108-113, (with V.S. Berkovskii V.T. Dzadan A.K. Grigorev A.N. Voronov).
- Effect of Deformation –sone Geometry on Pressure in Rolling with Plain –barrel R.H.Ibid, 1979, (118), 114-118, (with V.S.Bekovskii et al)
- Estimation of Residual life in Fluctuating loading through Resistance Measurement Trains. IIM, 1989(2), S275-278(with S.Sen and A. Biswas).
- Application of Eddy Current Test in the Study of Structural Damage by Fluctuating Loading , Presented att 41st Annual Meeting of IIM, 1987 (with S.Sen and A. Biswas)
- A Numerical Analysis on Neek Formation in Tension Specimens, Journal of Material Processing and Technology. (with T.K. Dutta) Vol. 54, No. 1-4, pp 309-313.
- Extension of Pairs Equations and its Application in the Study of Fatigue Processes. International Journals of Fatigue.
- A Method to Estimate Structural Damage By Fluctuating Loading, Journal of the Mechanical Behavior of Materials.
- Modeling of peak pressure in Extrusion using lead as a medaling materials forum.
- Simulation of Hot Rolling of Plain Carbon Steel, Journal of ISI.
- Mathematical Modeling of Spreading in rolling of stainless steel, Scientific Transaction on Plastic Deformation of Metals and Alloys, Metallurgic.
- Influence of Deformation –zone Geometry on Deformation Parameters in rolling, Scientific Transaction on Plastic Deformation of Metals and Alloys, Metallurgic.
- Mechanism of Spreading in Rolling with Cylindrical Rolls, (Manuscript ready) Scientific Transaction on Plastic Deformation of Metals and Alloys, Metallurgic.
- Spread in Rolling: A Review, Metals Review.
- Study of Hot Workability using Statistically Designed Experiments, (Manuscript ready) Scientific Transaction on Plastic Deformation of Metals and Alloys, Metallurgic.
Books.
- Fundamentals and technology of Rolling Processes, (Monograph).
- A Text Book on Principles and Technology of Metal Working (Manuscript ready).
- Experiments in Metal Working (Laboratory Manual).
- Alloy Steels Working (Monograph, under preparation).
Topic of Ph.D. Thesis Ph.D. And Guidance:
- Influence of deformation-zone Geometry on Deformation Parameters and Pressure in Rolling with Plain-barrel Rolls (Self).
- Life Estimation of Meals under cyclic loading (completed).
- Study of the Nature of Plastic Deformation Necking via FEM Route (completed).
Membership of Professional Institutes:
- Indian Institute of Metals, India (life member)
- Institution of Engineers, India.
Pastime Activities:
- Translation of Technical paper sand articles from Russian Language to English (Registered Translator of INSDOC, CSIR, India)
- Astrology and Predict as (Life Member, Indian Institute of Astrology).